安装篇：
本教程应用环境为干净centos 5.5 ，预先分好并加载/data分区,并且关闭selinux及iptables
首先修改文件描述符并设定临时端口范围，这些设置重启后生效
复制代码 代码如下:
cat >> /etc/security/limits.conf <<DDD
* soft nofile 8192
* hard nofile 20480
DDD
cat >> /etc/sysctl.conf <<DDD
#set temp port range
net.ipv4.ip_local_port_range = 32768 61000
DDD
init 6
确认修改是否正确
复制代码 代码如下:
[root@sudutest ~]# ulimit -n
8192
[root@suduotest ~]# sysctl -n net.ipv4.ip_local_port_range
net.ipv4.ip_local_port_range = 32768 61000
添加squid专用账户
复制代码 代码如下:
groupadd squid
useradd -g squid -s /bin/false -M squid
添加日志目录、设置缓存和日志目录的权限
复制代码 代码如下:
mkdir /data/squidlog/
chown -R squid.squid /data
然后上传或者wget squid3.0软件tar包，tar zxvf解压，并且进入解压后的目录安装编译
复制代码 代码如下:
./configure �prefix=/usr/local/squid3 �enable-async-io=100 �with-pthreads �enable-storeio="aufs,diskd,ufs" �enable-removal-policies="heap,lru" �enable-icmp �enable-delay-pools �enable-useragent-log �enable-referer-log �enable-kill-parent-hack �enable-arp-acl �enable-default-err-language=Simplify_Chinese �enable-err-languages="Simplify_Chinese English" �disable-poll �disable-wccp �disable-wccpv2 �disable-ident-lookups �disable-internal-dns �enable-basic-auth-helpers="NCSA" �enable-stacktrace �with-large-files �disable-mempools �with-filedescriptors=65535 �enable-ssl �enable-x-accelerator-var
make
make install
make install-pinger
至此squid已经成功安装了，然后大家自己所需的/usr/local/squid3/etc/squid.conf 配置文件，我这边的配置文件将会在本文末尾贴出来供大家研究。
写好配置文件后执行下面的命令初始化cache目录
/usr/local/squid3/sbin/squid -z
然后运行squid，注：-D参数用来跳过DNS检测
/usr/local/squid3/sbin/squid -D
最后设置squid开机自动启动
echo "/usr/local/squid3/sbin/squid -D " >>/etc/rc.local
维护篇：
以下是squid常用的命令
如果修改过配置文件，则用下面的命令重读配置文件（即时生效）
/usr/local/squid3/sbin/squid -k reconfigure
检查配置文件配置的语法是否正确
注：只有像这样的“cache_cf.cc(346) squid.conf:14 unrecognized: 'http1_port'”才是语法错误，
“WARNING: use of 'reload-into-ims'……”这类提示属于意见建议，可以忽略。
/usr/local/squid3/sbin/squid -k parse
查看squid的日志和进程，看squid运行是否正常
复制代码 代码如下:
ps -ef |awk '/^squid/'
cat /data/squidlog/cache.log
/usr/local/squid3/sbin/squid -k check ;echo $?
关闭squid
发出关闭信号，等会话结束后彻底关闭
/usr/local/squid3/sbin/squid -k shutdown
关闭squid（更高优先级，直接关闭squid）
/usr/local/squid3/sbin/squid -k interrupt
关闭squid（最高优先级，直接杀死squid进程）
/usr/local/squid3/sbin/squid -k kill
滚动日志文件
/usr/local/squid3/sbin/squid -k rotate
设置每周二凌晨四点30分自动滚动日志
echo "30 4 * * 2 root /usr/local/squid3/sbin/squid -k rotate " >>/etc/crontab
目前应用中的squid.conf文件，由于日志文件增长很快，所以直接输出到/dev/null丢弃掉了
复制代码 代码如下:
#basic
cache_effective_user squid
cache_effective_group squid
pid_filename /usr/local/squid3/var/logs/squid.pid
visible_hostname squid.678114.com
cache_mgr [email protected]
error_directory /usr/local/squid3/share/errors/Simplify_Chinese
icon_directory /usr/local/squid3/share/icons
mime_table /usr/local/squid3/etc/mime.conf
hosts_file /etc/hosts
acl DEIpadd dstdom_regex [0-9]$
http_access deny DEIpadd
cache_replacement_policy lru
memory_replacement_policy lru
http_port 80 vhost vport
cache_mem 4024 MB
maximum_object_size_in_memory 5120 KB
icp_port 0
#.cache_dir
cache_dir aufs /data/cache 50000 64 128
max_open_disk_fds 0
maximum_object_size 20 MB
#.cache_peer
cache_peer 125.76.225.44 parent 80 0 no-query originserver no-digest name=all
cache_peer_domain all .678114.com
#acl
acl Safe_ports port 80
acl SSL_ports port 443
acl LanSrc src 192.168.100.0/24
acl webdomain dstdomain .678114.com
acl manager proto cache_object
acl localhost src 127.0.0.1/255.255.255.255
acl CONNECT method CONNECT
http_access allow manager localhost
http_access deny manager
http_access deny !Safe_ports
http_access deny CONNECT !SSL_ports
http_access allow LanSrc
http_access allow webdomain
http_access deny all
#refresh_pattern
refresh_pattern -i /$ 15 90% 600 reload-into-ims
refresh_pattern -i .html$ 15 90% 600 reload-into-ims
refresh_pattern -i .htm$ 15 90% 600 reload-into-ims
refresh_pattern -i .shtml$ 15 90% 600 reload-into-ims
refresh_pattern -i .hml$ 15 90% 600 reload-into-ims
refresh_pattern -i .gif$ 1440 90% 129600 reload-into-ims
refresh_pattern -i .swf$ 1440 90% 129600 reload-into-ims
refresh_pattern -i .jpg$ 1440 90% 129600 reload-into-ims
refresh_pattern -i .png$ 1440 90% 129600 reload-into-ims
refresh_pattern -i .bmp$ 1440 90% 129600 reload-into-ims
refresh_pattern -i .js$ 120 90% 129600 reload-into-ims
refresh_pattern -i .css$ 120 90% 129600 reload-into-ims
refresh_pattern -i .wma$ 1440 90% 21600 reload-into-ims
refresh_pattern -i .zip$ 1440 90% 21600 reload-into-ims
refresh_pattern -i .mp3$ 1440 90% 21600 reload-into-ims
refresh_pattern -i .rar$ 1440 90% 21600 reload-into-ims
refresh_pattern -i .rm$ 1440 90% 21600 reload-into-ims
refresh_pattern -i .flv$ 1440 90% 21600 reload-into-ims
refresh_pattern -i .rar$ 1440 90% 21600 reload-into-ims
refresh_pattern -i .rm$ 1440 90% 21600 reload-into-ims
refresh_pattern -i .avi$ 1440 90% 21600 reload-into-ims
refresh_pattern -i .3gp$ 1440 90% 21600 reload-into-ims
refresh_pattern -i .mp4$ 1440 90% 21600 reload-into-ims
refresh_pattern -i .wmv$ 1440 90% 21600 reload-into-ims
#keepalived
client_persistent_connections off
server_persistent_connections on
#log
emulate_httpd_log on
logformat web1 %{X-Forwarded-For}>h %ui %un [%tl] "%rm %ru HTTP/%rv" %Hs %<st "%{Referer}>h" "%{User-Agent}>h" %Ss:%Sh
cache_log /data/squidlog/cache.log
cache_access_log /dev/null web1
cache_store_log /dev/null
strip_query_terms off
logfile_rotate 10
#other
forwarded_for on
log_icp_queries off
via off
httpd_suppress_version_string off
ie_refresh off
tcp_recv_bufsize 32 KB
ipcache_size 1024
ipcache_low 90
ipcache_high 95
cache_swap_low 80
cache_swap_high 90
request_header_max_size 128 KB
quick_abort_min 20 KB
quick_abort_max 20 KB
quick_abort_pct 95
connect_timeout 1 minute
negative_ttl 0 minutes
read_timeout 30 seconds
pconn_timeout 120 seconds
half_closed_clients off
client_lifetime 10 minutes
shutdown_lifetime 5 seconds
hierarchy_stoplist cgi-bin ?
access_log /dev/null squid
本文首发于
http://www.sudu.us/simple-to-install-squid-3-0-reverse-proxy-configuration/
您可能感兴趣的文章:
- nginx 作为反向代理实现负载均衡的例子
- windows安装nginx部署步骤图解(反向代理与负载均衡)
- Nginx 安装笔记(含PHP支持、虚拟主机、反向代理负载均衡)
- Nginx服务器做负载均衡反向代理的超级攻略
- 详解Nginx + Tomcat 反向代理 负载均衡 集群 部署指南
- 详解Nginx 反向代理、负载均衡、页面缓存、URL重写及读写分离详解
- 详解Nginx HTTP负载均衡和反向代理配置
- 利用Nginx反向代理与负载均衡搭建多人测试环境详解
- 详解 Nginx 负载均衡和反向代理配置和优化
- 详解Nginx反向代理和负载均衡部署指南
- CentOS6.5环境安装nginx服务器及负载均衡配置操作详解
- CentOS基于nginx反向代理实现负载均衡的方法
本文由 华域联盟 原创撰写：华域联盟 » centos下简单配置安装Squid 3.0反向代理
转载请保留出处和原文链接：https://www.cnhackhy.com/44260.htm
